Kohler Lombardini LDW FOCS 502 Euro 2, Service Manual

Page: 41 / 98

41
B
A
C
D
E
Q
F
42
43
44
5
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
5.6.4 Disassembling connecting rod and piston
1. Extract the connecting rod/piston assembly (
Q
).
2. Remove the crankshaft half bearings.
Warning
• Before removing the crankshaft half bearings, mark
the seat position, in order to recognise and match it
up during reassembly.
Important
• Be careful not to damage the half bearing during
removal.
1. Place the cylinder head on the workbench.
2. Press down hard on the cup (
A ), using the special tool.
3. Remove the half collets ( B ) blocking the cup ( A ), the
spring ( C ), the collar ( D ) and the gasket ( E ).
5.7 DISASSEMBLING THE VALVES
4. Remove the valves ( F ).
Important
• Keep components together during the disassembly
phase, in order to be able to reassemble correctly.
bearings
thrust bearings
REMOVING THE ASSEMBLIES