Kohler Lombardini LDW FOCS 502 Euro 2, Service Manual

Page: 83 / 98

83
H
G
P
N
L
M
140
141
7
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
7. Clean the cover ( H ) witha a jet of air.
8. Check the state of the filter cartridge ( G ).
If necessary, remove the cartridge, knock it repeatedly
against a flat surface to eliminate dirt and clean with
a jet of air.
9. Return the cleaned filter cartridge or replace it with
an original spare.
Warning
• Do not use liquids to clean the filter cartridge.
10. Replace the cover ( H ) and re-hook it carefully into
place.
Air filter (cylindrical type)
1. Check that the contact surfaces are perfectly clean
and intact.
2. Eliminate any blockages in the ducts.
3. Slip on a new gasket (
L ).
4. Bring the manifold ( M ) up to the cylinder head and
hook on the minimum-maximum device.
5. Install the manifold ( M ) without tightening the screws
(
N
) completely.
6. Tighten the screws in an alternating pattern to a final
torque of 25Nm.
7. Check the state of the filter cartridge. If necessary,
remove the cartridge and clean with a jet of air.
8. Return the cleaned filter cartridge or replace it with an
original spare.
Warning
• Do not use liquids to clean the filter cartridge.
9. Replace the filter housing.
10. Mount the cover (
P ).
minimum-maximum
device
governor spring
INSTALLATION OF ASSEMBLIES