Kohler Lombardini LDW FOCS 502 Euro 2, Service Manual

Page: 60 / 98

60
A
B
D
P
84
85
6
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
23. Once adjustment is finished, assemble the new
O-rings (
D
) on the injector pumps.
Important
• The O-rings must always be replaced with original
spare parts whenever the fuel rail is disassembled.
24. Apply some silicone sealant on the fuel rail seat.
25. Assemble the fuel rail and fasten the screws without
tightening them.
26. Tighten the screws to a final torque of 4 Nm.
27. Slip on a new gasket ( P ).
28. Reassemble the rocker arm cover (see “Assembling
the rocker arm cover”).
Important
• It is necessary to balance delivery whenever the
injection-pump is replaced.
In order to work on the injector, it is necessary to remove
the rocker arm cover.
See “Disassembling the rocker arm cover” for the correct
procedure.
1. Remove the fuel rail (
A
).
2. Mount the “7107-1460-127” tool heads ( B ).
6.7 BALANCING THE INJECTION-PUMP DELIVERY
OVERHAULS AND TUNING