Kohler Lombardini LDW FOCS 502 Euro 2, Service Manual

Page: 78 / 98

78
C
C
C
X
A
Y
C
B
A
E
F
A
A
G
G
126
127
7
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
7.7.1 Assembling the timing belt pulley
1. Insert the key ( B ) into the crankshaft.
2. Mount the pulley ( A ).
3. Mount the pulley (
C
) and tighten the screw to a torque
80 Nm.
Important
• To ensure the correct timing, line up the reference
notches on the pulley ( A-C ) with the respective gear
timing notches ( X-Y ).
7.7 INSTALLING THE TIMING BELT DRIVE
7.7.2 Assembling the timing belt
1. Insert the belt into the pulley ( C ). Keeping it taut, insert
into pulley (
A
).
Important
• Keep the reference arrows ( G ) directed as shown in
the diagram.
• The timing belt must always be replaced with an
original spare part whenever it is removed.
2. Keep the belt inserted into the two pulleys and then
mount it onto pulley (
E
) and the pulley nut (
F
).
3. Tighten the belt using the pulley nut ( F ) and fasten
temporarily.
Important
• To maintain engine timing while the timing belt is
being installed, keep it slotted onto the two pulleys
(
A-C ), which must remain lined up with their notches.
belt
INSTALLATION OF ASSEMBLIES