32
3
UM 12 LD 477-2 _ cod. ED0053031110 -
1° ed
_rev.
00
GENERAL NOTES
.
Lombardini
engines are built to provide safe and
longlasting performances, but in order to obtain
these results it is essential that the maintenance
requirements described in the manual are
observed along with the following safety
recommendations.
.
The engine has been built to the specifications of a
machine manufacturer, and it is his responsibility
to ensure that all necessary action is taken to
meet the essential and legally prescribed health
and safety requirements. Any use of the machine
other than that described cannot be considered
as complying with its intended purpose as
specified by
Lombardini
, which therefore
declines all responsibility for accidents caused by
such operations.
.
The following instructions are intended for the user
of the machine in order to reduce or eliminate
risks, especially those concerning the operation
and standard maintenance of the engine.
.
The user should read these instructions carefully
and get to know the operations described. By not
doing so he may place at risk his own health and
safety and that of anyone else in the vicinity of
the machine.
.
The engine may be used or mounted on a
machine only by personnel suitably trained
in its operation and aware of the dangers
involved. This is particularly true for standard
and, above all, special maintenance work. For
special maintenance contact personnel trained
specifically by
Lombardini
. This work should be
carried out in accordance with existing literature.
.
Lombardini
declines all responsibility for
accidents or for failure to comply with the
requirements of law if changes are made to the
engine’s functional parameters or to the fuel flow
rate adjustments and speed of rotation, if seals
are removed, or if parts not described in the
operating and maintenance manual are removed
and reassembled by unauthorized personnel.
WARNING
.
In addition to all other machine specifications,
ensure that the engine is in a near horizontal
position when starting. lf starting manually,
ensure that the necessary operations can be
performed without any risk of striking against
walls or dangerous objects. Rope starting
(except for recoil rope starting) is not permitted
even in emergencies.
.
Check that the machine is stable so that there is
no risk of it overturning.
.
Get to know the engine speed adjustment and
machine stop operations.
.
Do not start the machine in closed or poorly
ventilated environments. The internal combustion
process generates carbon monoxide, an
odourless and highly toxic gas, so spending too
long a time in an environment where the engine
discharges its exhaust products freely can lead to
loss of consciousness and even death.
.
The engine may not be used in environments
containing flammable materials, explosive
atmospheres or easily combustible powders,
unless adequate and specific precautions have
been taken and are clearly stated and certified for
the machine.
.
To prevent the risk of fire, keep the machine at a
distance of at least one metre from buildings or
other machines.
.
Children and animals must be kept at a sufficient
distance from the machine to prevent any danger
resulting from its operation.
.
Fuel is flammable, so the tank must be filled only
when the engine is turned off. Dry carefully
any fuel that may have spilled, remove the fuel
container and any cloths soaked in fuel or oil,
check that any sound-absorbing panels made
of porous material are not soaked with fuel or
oil, and make sure that the ground on which the
machine is located has not absorbed fuel or oil.
.
Before starting, remove any tools that have been
used for carrying out maintenance work to the
engine and/or the machine and check that any
guards removed have been replaced. In cold
climates it is possible to mix kerosene with the
diesel fuel to make the engine easier to start.
The liquids must be mixed in the tank by pouring
in first the kerosene and then the diesel fuel.
Consult
Lombardini
technical office for mixture
proportions. Petrol may not be used because of
the risk of it forming flammable vapours.
.
During operation the surface of the engine reaches
temperatures that may be dangerous. Avoid in
particular all contact with the exhaust system.
.
The liquid cooling circuit is under pressure. Do
not carry out any checks before the engine has
cooled down, and even then open the radiator
cap or the expansion tank cautiously. Wear
protective clothing and glasses. lf there is an
electric fan, do not approach the engine while it
is still hot as the fan may come on even when the
engine is not running. Clean the cooling system
with the engine turned off.
.
While cleaning the oil bath air filter, check that the
oil is disposed of in such a way as not to harm
the environment. Any filtering sponges in the oil
bath air filter should not be soaked with oil. The
cyclone pre-filter cup must not be filled with oil.
.
Since the oil must be emptied out while the engine
NORME DI SICUREZZA - NORMES DE SÉCURITÉ - SAFETY REGULATIONS
SICHERHEITSVORSCHRIFTEN - NORMAS DE SEGURIDAD - NORMAS DE SEGURANÇA
Summary of Contents for Lombardini 12 LD 477-2
