6
32
_
00
A
G1
G2
B1
B
A
A
C
C
B
B
Fig. 6.16
Fig. 6.17
Fig. 6.18
ED0053031100
INFORMATION ABOUT REPLACEMENTS
EN
6.9
Disposal and scrapping
•
In case of scrapping, the engine shall be disposed of in
appropriate locations, in conformity with the law in force.
•
Before scrapping, it is necessary to separate the rubber or
plastic parts from the rest of the components.
•
The parts only composed of plastic material, aluminium and
steel can be recycled if collected by the appropriate centers.
•
Waste oil must properly be recycled and disposed of in the
correct way to safeguard the environment. According to the
laws in force, it is classified as hazardous waste, therefore it
must be collected by the appropriate centers.
6.7 Coolant pump belt replacement
1
- Perform the operations from point
1
to
3
of
Par. 6.6.
2
- Remove belt
A
.
3
- Insert the new belt
A
onto pulley
G1
and start fitting pulley
G2
in point
B
, making sure to channel the internal ribs of
the belt into the ducts of pulley
G2
, as shown in detail
B1
.
4
- Start turning pulley
G1
clockwise manually, keeping belt
A
in position, as shown in detail
B1
.
5
- Continue turning pulley
G1
until belt
A
is completely
channelled on pulley
G2.
6
- Perform operations from point
4
to
7
of
Par. 6.6
.
6.8 Air cleaner replacement
1 -
Loosen clamp
A
and remove
filter
B
from manifold
A
.
2 -
Fasten the new air cleaner
B
onto manifold
C
using clamp
A
.
Summary of Contents for KDI 2504 M-MP
