Kohler KDI 2504 M-MP, Owner'S Manual

Page: 26 / 80

5
26 _ 00
Fig. 5.8
Fig. 5.9
Fig. 5.11 Fig. 5.10
E2
E1
E1
A
D1
D2 H1 H2
H3 H4
H4
F
G
G
B H5
G
F
G E3
ED0053031100
INFORMATION ABOUT MAINTENANCE
EN
NOTE: if the inside of the pipes on surfaces F1 and F2 ( Fig.
5.7
) are clogged with deposits even after having been
cleaned as per
step 6
, the pipes must be cleaned using
specific mechanical tools.
Important
• Replace all the gaskets.
9 - Fasten cap E2 onto manifold G using capscrews D2 ,
inserting flange E3 and also inserting:
- gasket
H1
between
E2
and
E3
- gasket
H2
between
E3
and
G
.
(tightening torque: MIN 5 Nm , MAX 7.5 Nm )
10 - Insert gasket H3 in radiator F .
11 - Insert radiator F all the way into manifold G .
12 - Insert gasket H4 in radiator F .
13 -
Fasten cap
E1
onto manifold
G
using capscrews
D1
(tightening torque:
MIN 5 Nm
,
MAX 7.5 Nm
).
14 - Clamp capscrew B on cap E1 , inserting gasket H5
(tightening torque 30 Nm ).
15 - Screw union A onto manifold G .
16 - Perform the operations described in Par. 4.6 .