TP-6727 10/11
43
Section 5 Controller
Display : *
Continued from Figure 5-6:
*
X
in the examples above denotes any number from 0 to 9. The actual values may vary from
model-to-model.
S A V E
To enter SAVE mode.
Note: Be sure to save your settings before exiting the configuration mode. The controller reverts to
the last
saved
settings when the master switch is moved to the OFF/RESET position.
To save changes.
To discard changes without saving.
or
S A V E
Y E S
Now move the master switch to OFF/RESET.
n o
There are 3 options when the display says SAVE:
Press:
or
To return to the first parameter, coarse voltage adjustment, to check
or change settings before saving. See Figure 5-6.
“Yes”or “no” flashes when the up or down arrow is pressed and then the
controller exits the configuration mode. The display returns to the
runtime hours.
1 P
x x x x
x x
or
To enter coarse voltage stability (gain) adjustment mode.
or
To raise or lower the voltage stability (gain) in large
increments.
To enter fine voltage stability (gain) adjustment mode.
or
To raise or lower the voltage stability (gain) in smaller
increments.
To enter volts/Hz adjustment mode.
To raise or lower the volts/Hz: 00=low; 09= high
2 P
2 P
3 P 0
x x
x
x
x
Figure 5-7
Output Voltage Adjustments, Continued
Summary of Contents for 15REYG
