Koden MDC-7010, Operation Manual

Page: 158 / 234

Chapter 6 Map operation MDC-7000/7900 Series
0093169010-10 6-14
9 9 9
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z + ?
D E L
E X I T S P A C E
← →
6.13 EDIT USER DATUM
In case that user specific datum needs to be entered, then use below procedure to set the name.
1
Press MENU key to display
“Menu”.
Select [MAP] => [EDIT USER DATUM] => Datum data input window will appear.
2
Select each letter one by one and press ENT key after each letter, when finished select [EXIT] and
press ENT key.
The three letters of [999] in the [DATUM] menu change to the edited letters.
6.14 POSITION OFFSET
This is to select OFFSET input of position.
Selection values: DTM, MAN
1
Press MENU key to display
“Menu”.
Select [MAP] => [OFFSET] => select [DTM] or [MAN], and press ENT key.
POSITION MANUAL OFFSET
LAT/LON position offset values input is available only when [MAN] of [POSITION OFFSET] menu is
selected.
1
Press MENU key to display
“Menu”.
Select [MAP] => [MAN OFFSET] => input offset value of latitude/longitude separately => and press
ENT key.
Selection values: 1.000S to 1.000N
1.000W to 1.000E
The [999] changes to edited letters.