Koden MDC-7010, Operation Manual

Page: 145 / 234

MDC-7000/7900 Series Chapter 6 Map operation
0093169010-10 6-1
Chapter 6 Map operation
6.1 MAP function display ON or OFF
This is to turn ON/OFF the entire MAP function.
Select the MAP ON or OFF box at the lower left corner of the display using trackball and press ENT
key. (To display CHART, select [MAP] => [CHART] => [ON].)
This operation links the functions, COAST LINE, NAV LINE, ROUTE, EVENT MKR and AREA. In case
CHART is
“ON”, CHART display is linked to this operation.
It is not displayed as well as HL while OFF key is pressed.
6.2 OWN SHIP PAST TRACK
OWN SHIP PAST TRACK consists of 2000 points x 10 blocks. This is to set up OWN SHIP PAST
TRACK, record ON or OFF, display, clear operation, color setting and line style for each block, and set
up recording interval common to all blocks.
Record / Display of Own ship past track is set for each block.
1
Press MENU key to display
“Menu”.
Select [MAP] => [OWN TRACK] => select [0 to 9] => select [OFF], [ON] or [DISP], and press ENT
key.
Setting
Record / Display of Own ship past track
OFF
Own ship past track is not recorded.
Own ship past track is not displayed.
ON
Own ship past track is recorded and displayed.
When own ship past track record will be full in a block, it continues to be
recorded in the next block set to [ON].
When all the blocks set to [ON] will be full, own ship past track record will
overwrite previously written data.
DISP
Own ship past track is displayed.
In the block set to [DISP], own ship past track will not be recorded.
CAUTION: Factory default settings: All blocks are set to [OFF].
CHART [OFF] CHART [ON]