Koden KDS-6000BB, Installation Manual

Page: 63 / 72

KDS-6000BB Chapter 3 Maintenance
0092660002-06 3-3
3.4.2 System check
The system can be checked by maintenance
menu.
1. Press for a while to display the
maintenance menu.
2. Turn (knob/left) to select [System
cheek].
3. Press or .
4. Turn and select [Execute] to
conduct system check or [Cancel] not to
conduct system check.
5. Press or to confirm.
When [Cancel] is selected, the screen
returns to the maintenance menu.
When [Execution] is selected, the system
check screen is displayed.
The system condition is displayed as shown
in the figure above.
(1) KDS-6000BB: [ver.**.**]
Program version
(2) ROM check
(3) RAM check
(4) NMEA I/O output: Loop check
(5) Voltage check: 10.8 to 31.2 V
(6) SD card check
(7) Baud rate of Transducer unit
(8) Communication state of Processor unit:
At normal: Count of number of OK
At abnormal: Count number of NG
(9) Receiving data
(10) Confirmation of voltage (Transducer
unit)
Upper: High, Lower: the value of 15.5V
or higher is indicated.
(11) Water temperature: ± 2
˚C
Value of temperature
(12) Origin (Condition of origin detection)
At normal: OK
At abnormal: NG
6. Press for a while to display the
maintenance menu.
Menu
System check
Setting of shipping from factory
Demonstration files (Sonar)
Demonstration file (Side scan)
Clearing of ship
’s track
Deletion of file
Adjustment of depression origin
Start of saving
Demonstration files (Echo
Cancel
Execute
Menu
System check
Initialize
Demo file (sonar)
Demo file (bottom scan)
Wake erase
Delete files
Tilt origin adjustment
Save start
Demo file (echo sounder)
0
(1)
(7)
(10)
(11)
(12)
(8)
(2)
(3)
(4)
(5)
(6)
(9)