Koden KDS-6000BB, Installation Manual

Page: 24 / 72

Chapter 1 Installation KDS-6000BB
1-4 0092660002-06
1.4 Installation of Operation unit
KDS-6000BB operation unit can be installed either on desk-top or flush-mounted.
Install by the following procedure.
1.4.1 Desk-top installation of Operation unit
(1) Decide the location to install the Operation unit and keep the space for the maintenance
works as shown in Fig. 1.4.
(2) Mark the position where installation plinth is installed (See Fig. 1.3)
(3) Remove 4 plastic corner guard caps of the Operation unit (These can be easily pulled out
upwards).
(4) Fix the clamps to the Operation unit with M4 screws (4 mm). Install the corner guard caps
removed in step (3).
(5) Confirm that the clamps matches the making position. If not matches, correct the marking
position.
(6) Install the clamps in the installing location (4 holes) and fix it with 4 tapping screws (4 mm)
(M4 or pan-head). (Prepare 4 mm screws suitable for thickness of installing location.)
Fig. 1.3 Installation of an Operation unit on the desktop