Koden KDS-6000BB, Installation Manual

Page: 23 / 72

KDS-6000BB Chapter 1 Installation
0092660002-06 1-3
1.2 Installation of KDS-6000BB Display unit
The display unit should be prepared by customers and should be installed in accordance with
the installation manual attached to it. In addition, please be sure to carry out the following:
(1) Decide the location to install the Display unit and keep the space for the maintenance
works.
(2) Energizing shall be performed after confirmation of the installation of display unit, and
other components, and the completion of power cabling works for them.
1.3 Installation of KDC-6000BB Processor unit
The Processor unit can be installed on either on table or panel.
Install by the following procedure.
(1) Please determine the place where the Processor unit will be mounted with enough space
for the maintenance.
(2) Make 4 holes at the location to be installed (See Fig. 1.2)
(3) Install the Processor unit in the installing location (installation hole) and fix it with 4 tapping
screws (4mm) (M4 or pan-head). (Prepare 4mm screws suitable for thickness of installing
location.)
Fig. 1.2 Position of installation hole of Processor unit
308
(1
2 1/
8
)
308
(1
2 1/
8
)
308
(12 1/8)
308
(12 1/8)
4-
φ4.5
Unit: mm (inch)