KDS-6000BB
Chapter 1 Installation
0092660002-06
1-19
(4) Adjustment of hoisting and lowering stroke
By adjustment of the lower limit switch as shown below, the hoisting and lowering stroke
of the Transducer unit can be changed from min. 150 mm to max. 380 mm.
To lower the Transducer unit to an approximate position, please adjust the unit with this
lower limit switch.
When the limit switch is raised, please fix the wires by ANP base and the binding bands
attached so as to prevent the wires from touching with the hoist gears.
Fig. 1.22 Adjustment of hoisting and lowering stroke
Raised position
Max. lowered
position
380 mm
Adjustable range (200 mm)
Moves up and down
By loosening these
screws of the lower
limit switch, lowering
posited can be
adjusted.
Summary of Contents for KDS-6000BB
