Koden ESR-S1BB, Operation Manual

Page: 70 / 73

6-6
APPENDIX
REMOTE CONTROLLER SETTING
1. Press MENU KEY. “MENU” appears on the screen.
2. Use the cursor shift key [ ↑ ] or [ ↓ ] to highlight “REMOTE CONTROLLER SET” and by
pressing the cursor shift key [ ← ] or [ → ] the following appears on the screen.

The above box shows the initial settings of the remote control keys.

Highlighting the item to be changed and pressing the cursor shift key [ ← ] or [ → ] the
keyoperation will change as follows.
RENGE SHALLOW → RANGE DEEP → SECTOR WIDE → SECTOR NARROW →
DISPLAY MODE* → OPERATION-1 → OPERATION-2 → TARGET LOCK →
THRESHOLD → CURSOR → CURSOR UP → CURSOR DOWN → CURSOR RIGHT →
CURSOR LEFT → NO SETTING → HOIST UP → HOIST DOWN → TILT UP → TILT
DOWN → BEARING RIGHT → BEARING LEFT

DISPLAY MODE* means that each press of the key changes the mode as follows.
SONAR MODE
→ OFF CENTER MODE → BOTTOM SCAN MODE → ECHO SOUNDER
MODE → SONAR MODE

Press ENTER KEY to finish the setting.
Press MENU KEY to escape the setting.

Use the cursor shift key [ ↑ ] or
[ ↓ ] to select the desired item.
Remote controller keys
REMOTE CONTROL SET
1 BEARING LEFT
2 BEARING RIGHT
3 RANGE SHALLOW
4 TILT UP
5 RANGE DEEP
6 TILT DOWN
7 OPERATION-1
8 OPREATION-2