Koden ESR-S1BB, Operation Manual

Page: 30 / 73

2-10
SONAR OPERATION
OPERATION MODE KEYS
Use these keys to select one of 2 kinds of operation mode you have created. (You may
be able to create 4 kinds of operation mode by FUNCTION SETTINGS.
CF
page 3-15)
By pressing one of these keys, the desired operation mode can be set immediately.
To memorize the setting in the Operation Mode key, the following procedure is required.

Create your own setting of operation mode.

Exit Menu.

Hold the Operation Mode [1] or [2] key for 3 seconds until you hear a beep. The operation
mode that you have created is now memorized in the Operation Mode key. Note that it may
not be memorized when the key is released before you hear a beep.

By pressing the Operation Mode [1] or [2] key, you hear a beep and the desired operation
mode appears on the screen instantly. Note that you hear 3 beeps and nothing changes
when pressing the Operation Mode [1] or [2] key memorized nothing.

You may adjust the setting while one of the operation modes works, however pressing one
of the Operation Mode keys again returns to the previous operation mode.

It is possible to memorize the present setting in the Operation Mode keys by holding the key
for 3 seconds.

The Operation Mode key number appears on the screen.
indicates the function setting number you
selected.
indicates the Operation Mode key number you
selected.
RANGE
１６０ｍ
BEARING
０゜
SECTOR
３６０゜
TILT
－３０゜
ＩＲ－１ M - 0 - 1
MARKER
８６．０ｍ
９９．３ｍ
４９．７ｍ
CURSOR
十 ３０５゜
６５．２ｍ
７５．３ｍ
３７．７ｍ
２４．７゜Ｃ
１６．０ｋｔ
１３７゜
０３．８４’Ｅ
３４゜
３３．４０’Ｎ