Koden ESR-S1BB, Operation Manual

Page: 6 / 73

3
FOR YOUR SAFETY
INSTALLATION SITE REQUIREMENTS
Keep the unit away from the flammable gas.
Otherwise it causes a fire.
Follow the below proposed conditions for the installation.
Otherwise it cases a fire or an electrical shock.
Away as much as possible from areas where the unit is likely to
be exposed to direct water spray and free as much as possible
from shocks and engine vibration.
Away as much as possible from areas of high temperatures or
areas where the unit is likely to be exposed to direct sunlight.
MOUNTING CONDITIONS
Do not install the ESR-S1BB on unstable or uneven surfaces.
Installing the unit tentatively may result in dropping, toppling
over or injury.
Follow the below conditions for wirings.
Otherwise it cases heat, a fire or injury.
Run the cables not to touch the rotary obstacles or disturb
the operation.
Do not use the cables bent, twisted or stretched by force.
Do not put heavy objects on the cables.
Always turn off the power before connecting or disconnecting
the unit.
Pulling the cables may damage the cables themselves and
result in fire or electrical shock.
POWER SUPPLY
Operating voltage: 12 to 30 volts DC.
Use the proper voltage. Otherwise it will result in fire or electrical
shock.
Turn on/off the power by ON/OFF keys on the control panel.
Turning on/off the power by the switchboard may damage the unit.
Turn off the power when starting the vessel engine.
Otherwise it may damage the unit.
WARNING
WARNING
WARNING
CAUT ION
CAUT ION
CAUT ION