Koden CVS-872D, Installation Manual

Page: 70 / 112

Chapter 1 Installation CVS-872D
1-52 0092607062-01
Connection of External Monitor (J5) [Owner supply]
When installing an external monitor (XGA monitor, analog RGB input), connect it via
CW-576-0.5M to J5 connector. Refer to the illustration below for the wiring.
After soldering, perform the waterproof and insulation treatment on the junction with a
self-fusing tape.
Structure of CW-576-0.5M
Fig. 1.47 Connection of External Monitor
Connection of CCD camera (J4) [Owner supply]
CVS-872D and a CCD camera (NTSC/PAL/SECAM) can be connected via CW-405-0.3M
(option). Connect the video output terminal (RCA plug; yellow in most cases) of your CCD
camera. Perform the waterproof treatment on the junction of the RCA terminal with a
self-fusing tape. Refer to the following for the connection.
Connector Pin Remarks
J4
1 CCD camera input
2 CCD (-)
3 NC
4 NC
5 NC
6 NC
7 NC
Fig. 1.48 Connection of CCD camera
RCA plug (Y
ellow)
(White)
To an external monitor
via CW-560-2M or
equivalent
(Black)
NC