Koden CVS-872D, Installation Manual

Page: 109 / 112

CVS-872D Chapter 3 Maintenance
0092607062-01 3-5
When one of [CM1] to [CM6] is selected,
the set values commonly used at each CM
such as selected language and units will
not be initialized.
When [System ALL] is selected, all setup
values including the values commonly
used at each CM will be initialized.
5. Press [ ].
The setup box of [CM Initialize] will be
displayed.
6. When initialization is performed, select
[Yes] for initialization by
pressing [▲] and
[▼] keys, and [No] for not to initialize.
7. Press .
At [Yes], initialization will be performed.
At [No], the menu will be closed.
3.4.4 Update of program
This is used for program update.
(Please consult your sales agent)
1. Press .
2. Select [Maintain]
– [System Program
Load].
3. Press [ ] of .
The setup box of [System Program Load]
will be displayed.
4. When program is to be updated, select
[Yes] and is not to be updated, select [No]
with [▲] and [▼] keys.
5. Press .
When [Yes] is selected, program will be in
updating condition and a message
“Updating
Do not Power Off.
” will be displayed.
When [No] is selected, returns to the
menu.
6. The program will be downloaded from
USB ROM writer or PC.
When downloading has started, [CM]
keys will blink red in the order of CM1 to
CM6.
At completion of downloading, the both
gain knobs will be lighted red.
7. Pressed for about 5 seconds to
switch off the power.
Caution: When program updating
failed on the way, switch off the
power once and switch on again. It
will start up in the wait status of
downloading. Try again the
procedures from step 6 again.
Caution: When [System All] is
selected, the display will be in
English after initialization.