Koden CVS-872D, Installation Manual

Page: 100 / 112

Chapter 2 Adjustment CVS-872D
2-2 0092607062-01
It is processing.
Please wait a while.
Caution:
When [Others (1 Frequency)] or
[Others (2 Frequency)] is
selected, [Spc. Adj.] - [Output limit
XF] is set to "70" (2kw
equivalency).
After this setting, set it according
to the TX power of the TD to use.
For details on the settings,
refer to
“
2.6 Setup of Output Limit
for transducer".
Caution: The setup of beam angle is
reflected on the display of
detecting range and will not
change the actual beam angle.
(As for beam angle, refer to [Type
of transducer] in Configuration of
Equipment)
The following message is displayed and the
TD is set.
.
It will return to TD Setting
– XF TD Type in a
few seconds.
The TD selected in [Broadband Type] is also
set in both [Broadband Type] high frequency
and low frequency.
The [Frequency], [TX power], and [Beam
Angle] of the selected TD are set
automatically.
The [Frequency], [TX power], and [Beam
Angle] of the TD selected in [TD-XXX] of
[Others] are also set automatically.
When the name of TD to use is unknown,
select [Others (1 Frequency)] or [Others (2
Frequency)].
Select [Others (1 Frequency)] when using a
single frequency TD.
Select [Others (2 Frequency)] when using the
2-frequency alternating transmission TD.
2.2 Setup of frequency and
beam angle
TD Setting
– HF TD1 setting
TD Setting
– HF TD2 setting
TD Setting
– LF TD1 setting
TD Setting
– LF TD2 setting
1. Press .
2. Select [TD Setting] - [XF TDX Setting]
3. Press [
] of .
The setup box of [XF TDX Setting] will be
displayed.
4. Select [Frequency] for changing of frequency,
and [Beam angle] for changing of beam angle
with [▲] and [▼] keys.
5. Press [
].
When [Frequency] is selected, the setup box
of frequency will be displayed.
When [Beam Angle] is selected, the setup
box of beam angle will be displayed.
6. Setup frequency or beam
angle with [▲] and
[▼] keys.
When [Broadband Type] is selected in 2.1.1,
beam angle will be automatically set at setup
of frequency.
7. Press to close the menu.