Chapter 5 CVG-200
Basic Operation
5-4 0093132802-08
5.3 Displaying the Image
5.3.1 Power On/Off
When the power is off, press to
turn the power on.
Also, when the power is on,
pressing turns the
power off.
5.3.2 Brightness Setting
Push , and the brightness display shall appear.
Push the directional key or to set the brightness.
You can also adjust the brightness one increment at a time by pressing repeatedly. A
brightness setting left without adjustment for over 5 seconds will be taken as the current setting.
The user may alter the preset factory brightness.
To record the user’s brightness setting, follow the procedure outlined below:
→
“etc”
→
“Maintenance”
→
“System Test”
→
“Brightness”
→
[Set]
→
5.3.3 Choosing the Display
Push repeatedly to pull up various pre-stored display screens.
The user can store or delete displays according to the procedure outlined below:
→
“etc”
→
“Screen Display Registration”
→
[set]
→
Brightness
Dark
B r i g h t
Brightness Display
Caution
On Head up and Own ship center fix mode, sounder and plotter
combined screen cannot be selected.
This display appears when the
power is switched on.
Caution display
- - CAUTION - -
The information displayed on this
equipment shall be used for reference
only. Authentic navigation charts shall be
used when navigation judgment is
required.
KODEN ELECTRONICS CO., LTD
CVG-200
KODEN
KMC-101
VerX.XX
（
WWB00401
）
Backup Battery cell
OK
System test
OK
