Chapter 6
CVG-200
Using the Menu
6-38
0093132802-05
6.3.10 Drawing Edit
Graphic drawings may be edited by using the cross cursor key or by directly entering numerical
values such as latitude and longitude.
6.3.10.1
Cursor
6.3.10.1.1
Movement
Move graphic nodes in the drawing via the cross cursor by the following method:
(1) Select cross cursor as the method by which to move a node.
(2) Move the cross cursor to the new position (destination) of the node.
(3) Press
to confirm the move. Press to cancel the move.
6.3.10.1.2
Addition
Add nodes to the drawing via the cross cursor by the following method:
(1) Designate a node using the cross cursor. The new node shall appear behind the node
designated by the user.
(2) Move the cross cursor to the position of the newly added node.
(3) Press to confirm the addition of this new node. Press to cancel this
addition.
6.3.10.1.3
Erase
Delete nodes from the drawing via the cross cursor by the following method:
(1) Designate the node to be deleted using the cross cursor.
(2) Press to confirm the deletion of this node. Press to cancel this deletion.
6.3.10.2
Value
6.3.10.2.1
Movement
Move nodes in the drawing by the following method:
(1) Select or input the number corresponding to the node to be moved.
(2) Enter the latitude and longitude of the new node.
(3) Press
to confirm this move. Press to cancel the move.
6.3.10.2.2
Addition
Add nodes to the drawing by the following method:
(1) Select the number corresponding to the node directly in front of the node for the new point
to be added.
(2) Enter the latitude and longitude of the new node.
(3) Press
to confirm this addition. Press to cancel the addition.
