CVG-200 Chapter 5
Basic Operation
0093132802-08 5-35
Adjust the STC Depth and STC Amplitude values in order to obtain the best image.
5.5.4 Operation of the [Shift] Key
There exist 2 kinds of shifts: “Fix Shift” and “Auto Shift”.
Fix Shift: From Pre-determined depth(Shift start depth), the range is set and displayed.
Auto Shift: Should there be a sudden change is depth of the bottom engaging the Auto Shift
ensures that 30-90% of the scope of the sea bottom is displayed at all times.
5.5.4.1
Fix Shift Settings
Push to bring up the display shown below.
With the Shift Setting Menu displayed, pressing will switch the Fix Shift option off or on.
With the Fix Shift option on, the user can specify the amount of shift. Pressing the
directional keys left or right ( or ) moves the cursor, and the control knob
sets the values. Turn the control knob right to increase the values, and left to
decrease the values. While the Fix Shift option is active, the right of the display will
show the following:
Range
Shift start depth
SHIFT
Control knob adjusts
the value.
Down Up
Shift
OFF
Fix Shift OFF
Fix Shift Active
0000
Digit being adjusted
indicated by cursor
position (use
directional key).
Shift
SHIFT
MS
