CVG-200 Chapter 5
Basic Operation
0093132802-08 5-7
5.4.4 Display of Distance between Two Points and Bearings
Using the cross cursor enables the user to calculate the distance between two points as well as
bearing.
Push and the cross cursor shall appear on the plotter.
Move the cross cursor to the desired cardinal point, and press . A screen showing the
distance between two points shall appear.
Move the cross cursor to where you want to measure distance and bearings in relation to the cardinal
point and press .
On the “Two-Point Display” the distance and bearings shall appear.
Move the cross cursor once again, and the distance between the cardinal point and this new point can
be displayed.
Press any key except for
, and the “Two-Point Display” shall close.
Geodesic Line
Distance = 0.00nm
Bearing = 000.0
°
Cardinal point
N
N
2
nd
point
Geodesic Line
Distance = 15.00nm
Bearing = 045.0
°
