CVG-200
Chapter 6
Using the Menu
0093132802-05
6-29
6.3.4 Mark Edit
6.3.4.1
Edit
The user may determine “Mark No. ”and edit the following parameters: “Mark Shape”,“Mark Color”,
“No. Display”, “Display”, “Latitude/Longitude”, and “Comment”.
Mark No. Setting Range: 00000 to 8299
Mark Shape Setting Range:
○
,
□
,
▽
,
×
,
☆
,
△
,
◇
Mark Color Setting Range: Green, Red, Yellow, Dark Blue, Blue, Pink, White
Number display Setting Selection: OFF, ON
Display Setting Selection: OFF, ON
Latitude Setting Range: 00
ﾟ
00.000 to 90
ﾟ
00.000N, 00
ﾟ
00.000 to 90
ﾟ
00.000S
Longitude Setting Range: 000
ﾟ
00.000 to 180
ﾟ
00.000E, 000
ﾟ
00.000 to 180
ﾟ
00.000W
Comment Setting Range: 12 letters
(0 to 9, A to Z, &, #,_, . )
6.3.4.2
Transfer
Transfers the contents of designated mark number registration to a specified mark number.
Transferring Mark Number Setting Range: 00000 to 8299
Receiving Mark Number Setting Range: 00000 to 8299
Once the transfer is completed, the original data will be deleted.
Should data exist in the mark receiving data, that data shall be overwritten by the incoming data.
The transferring mark and receiving mark cannot have the same number.
The user may find it convenient to designate the waypoint and other sites with consecutive mark
Numbers.
6.3.4.3
Delete
Deletes the contents of designated mark number registration.
Range of mark numbers that may be deleted: 00000 to 8299
Marks without data cannot be selected.
6.3.4.4
Operation Of Blocks
6.3.4.4.1
Display of Blocks
Determine whether or not the mark number for each mark block shall be displayed. Also determine
whether or not the mark itself shall be displayed.
Mark Number Display Setting Selection: NO, YES
Mark Display Setting Selection: NO, YES
