CVG-200 Chapter 5
Basic Operation
0093132802-08 5-15
5.4.8 Setting Waypoints
To set waypoints, the user can use a registered mark or move the cursor to the destination.
5.4.8.1
Setting a Registered Mark as Waypoint
In Waypoint mode, a specified point becomes the waypoint. In the operation shown below, Waypoint
mode begins with using the current position as a reference point.
(1) Confirm that the cross cursor is not displayed anywhere on the screen.
(2) Press
and the Waypoint Setting Window shall appear.
(2) Using the key to choose the mark designated to be the waypoint. If the selected
mark is on the screen, it shall blink.
(3) Press
and the position of the selected mark shall become the waypoint.
・
When the waypoint is set, the bottom of the plotter shall display information pertaining to it.
This mark is chosen as the
waypoint.
Mark No. 53 has been
designated as the waypoint.
53
N
53
N
Wayp o i n t s et t i n g
0000
0
Mark Number
Shape of registered mark
(When no mark is registered, nothing shall
appear here.)
Information on the
position of the waypoint
is displayed
here.
35
°
16.289N
139
°
45.569E
277.3
°
44.1
nm
Waypoint Mark
Waypoint Latitude / Longitude
Waypoint Bearings
Distance from boat to waypoint
