Chapter 5 CVG-200
Basic Operation
5-10 0093132802-08
5.4.6.2
Track Color Settings
There are 3 types of Settings for Track Color: “
Normal
”, “
Sounding RESP
”, and “
W_Temp RESP
.”
Normal
: Manually choose from 7 colors in this setting.
Sounding RESP:
Based on the depth of the water, the color of the tracks shall be automatically
colored. When the water depth cannot be measured, the tracks are automatically assigned a
green color.
W_Temp RESP
：
Based on the water temperature, the color of the tracks shall be automatically
colored. When the water temperature cannot be measured, the tracks are automatically
assigned a green color.
Procedure for selecting settings is as follows:
→
“Plotter”
→
“Track Color”
→
[Set]
→
5.4.6.2.1
Normal Track Coloring
Push and the track color selection window shall appear.
The cursor in the selection window indicates which color is the
current setting.
The cursor may be moved up or down using the directional keys:
or Should the setting remain unaltered for more than 5
seconds, the color upon which the cursor is resting shall be
designated as the current color setting.
5.4.6.2.2
Depth-based Coloring
When the track colors are determined by depth, pressing
shall cause the window at the right to appear.
In these cases, the track colors cannot be changed.
Setting track coloring to depth-based coloring can be done as follows:
→
“Plotter”
→
“Track Color”
→
[Set]
→
5.4.6.2.3
Water Temperature-Based Coloring
When the track colors are determined by water temperature,
pressing
shall cause the window at the right to appear. In
these cases, the track colors cannot be changed.
Setting track coloring to water temperature based coloring can be done as follows:
→
“Plotter”
→
“Track Color”
→
[Set]
→
Tr ack Color
Cursor
Tr ack Color
Dependent on track
color for depth is
selected.
Tr ack Color
Dependent on
track color for
water temperature
is selected.
