Kodak X-OMAT 7000, User Manual, Page: 72 / 146

Key Operator Instructions
5– 12 16FEB01 – 7E6174
Using the Access Code
Only your Kodak Service Representative and Key Operator should have use of the
access code. The Key Operator receives the access code when trained by Kodak. Press
GO TO SETUP and enter the access code.
The access code is necessary to:
• change setup information preset at the factory
• change to or from the “K/RA” cycle
If the Limited Access Feature is off, an access code is not necessary to perform the
functions listed below:
• select Processor cycles (except “K/RA”)
• change dryer temperature
• display fixer temperature
• place the Processor in the sleep mode
• display the time and the date
1. On the Processor Main Menu press PROC.
Screen 1 of the Processor Main Menu is displayed.
Note
All descriptions on the following pages start with this menu.
PROC SERIAL LOAD UNLOAD FUNC
*
M A G. 1:
M A G. 2:
M A G. 3:
M A G. 4:
M A G. 5:
M A G. 6:
M A G. 7:
8 x 10 in
35 x 43 cm
35 x 43 cm
18 x 24 cm
24 x 30 cm
24 x 30 cm
18 x 24 cm
V
X
X
X
X
M
M
#2 ?
EMPTY
ORANGE
GREEN
RED
ON
Soft Switches
Status Lights
H186_8501AC
o o
PROCESSOR READY
DRYER SELECT DONE/
127 F = DRYER TEM
TEMP CYCLE RETURN
95 F = DEV TEMP
STD
MORE SLEEP
H186_8514AC