Kodak X-OMAT 7000, User Manual, Page: 41 / 146

Overview
7E6174 – 16FEB01 3– 9
4. Insert an empty Cassette.
• The Multiloader checks whether a film is in the Cassette. If the Cassette
contains a film, a message is displayed and an audible alarm sounds. The film
is transported to the Processor and the Cassette loaded. Press CLEAR to stop
the alarm.
• The Cassette is loaded as requested.
Unload Only
Use “Unload Only” to remove the film from a Cassette and not reload the film.
1. Start at the "Ready Status" on the Display Panel.
2. Press Unload.
The following is displayed.
3. Insert a Cassette
• The Cassette is returned either with the Latch open or closed, depending on
how it has been set at installation by the Kodak Service Representative.
• If the Cassette is inserted empty for Unload Only, a message is displayed and
an audible alarm sounds. Press CLEAR to stop the alarm.
ORANGE
GREEN
RED
ON
RETURN
CASSETTE WAS NOT EMPTY
Flashing
"BEEP"
CODE CLEAR
H186_8509AC
H186_8510AC
UNLOAD ONLY
CLEAR
ON
RED
GREEN
ORANGE