Kodak DryView 8150, Service Manual, Page: 52 / 470

Service Manual
2-32
7F3318 2005 July Rev. B
Include modality ID
in annotation
If the user wants the modality ID to be anno-
tated on the print, select YES. See the item
below.
Check with user.
Modality ID The Modality ID indicated will be printed in
the Annotation Text Box on the print. The ID
includes the first 8 characters of the SCP
node Name plus the 2 last octets of the SCU
IP Address.
Check with user.
Annotation Override If you select YES, the values entered for all
the annotation parameters will override any
values sent down from the SCU.
Select NO.
Density Patch Use of the Density Patch is selectable only
for 14 x 17 in. film.
Default is YES, but check with the
user.
Image Resizing The 2 options are MINIFY/SCALE or CROP.
•
To “minify” is to decrease the image by
removing pixel data via a software
algorithm if the raw image is too large for
the film. When this occurs, the “minify”
icon is printed on the film. See Figure 2-2.
•
To “scale” is to de--magnify, or scale
down, the image if the requested image
size is too large for the film. When this
occurs,the “scale” icon is printed on the
film. See Figure 2-2.
•
To “crop” is to remove the edges of the
image so it fits on the film. The uncropped
part of the image will remain true size.
When this occurs, the “crop” icon is
printed on the film. See Figure 2--2.
Check with the user. If MINIFY/
SCALE is selected, the IMAGER
will determine which type of de-
magnification is to be used, either
MINIFY or SCALE.
For Always Apply...”, select NO.
Some SCUs have the ability to in-
dicate type of resizing and should
be allowed to override the default
value set in the IMAGER.
Text Box Location This parameter applies only to “1-up” images
on 14 x 17 in. film, when crop has been se-
lected for image resizing. Text Box Location
indicates the location on the page for the an-
notation box. The box can be cut and pasted
on the cropped image at the TOP or BOT-
TOM of the film.
Check with user for desired loca-
tion. Select NONE if cropping is
not used.
Source ID This is the source name used for logging DI-
COM communications from this SCU. It also
identifies the SCU in the SERVICE TOOL
print statistics.
Select a short name for the SCU.
Minify Icon
Scale Icon
Crop Icon
Figure 2-2. Cropping Icons