Kodak DryView 8150, Service Manual, Page: 44 / 470

Service Manual
2-24
7F3318 2005 July Rev. B
2-6-3. Setting the System Clock
1. From the main menu of the SERVICE TOOL, select Configuration >System>Clock .
Note
The system clock is set in manufacturing. At installation, the “Time Zone” setting has to be changed
if the IMAGER is installed in a different time zone. When the “Time Zone” setting is changed, the
“Time” and “Date” should display correctly.
2. To correct the “Time Zone” setting:
a. Click [Modify].
b. Select the correct Time Zone from the “Time Zone” dropdown menu.
c. Click [Save].
3. If the “Time” value is incorrect:
a. Click [Modify].
b. Select a field in the “Time” window and use the Arrows to increase or decrease the time.
c. Click [Save].
d. Notify Service Engineering that the time was incorrect and had to be changed.
Note
The “Date” can be changed only by Level 5 personnel. If necessary, you can obtain 24 hours Level 5
access to the IMAGER from TSC.
4. If the “Date” display is not correct:
a. Obtain Level 5 access to the the IMAGER from the TSC.
b. Click ]Modify].