Kodak DryView 8150, Service Manual, Page: 360 / 470

Service Manual
8-18
7F3318 2005 July Rev. B
Else
Set oShell = CreateObject(”WScript.Shell”)
Set oExec = oShell.Exec(”cmd /c ” _
& Chr(34) & ”c:\DV8150\Utils\SetMcsPpp” & Chr(34) _
& ” ----conn MCS1 ----ip ” & sNewIP)
Do While Not oExec.StdOut.AtEndOfStream
sLine = sLine & oExec.StdOut.Readline()
Loop
If sLine = ”setmcsppp [----help] [----conn <connection name> ----ip <ip address>] [----version]” Then
MsgBox(”Bad input. Make sure the IP is x.x.x.x where x is unique between (1 and 255)”)
Else
addArray = Split(sNewIP, ”.”,--1,1)
addStr = addArray(0) & ”.” & addArray(1) & ”.” & addArray(2) & ”.” & (addArray(3) + 1)
oShell.RegWrite ”HKLM\SOFTWARE\KHID\Fastball\MIB\IpAddress”,addStr,”REG_SZ”
Script.Trace ”MCS SNMP agent == ” & oShell.RegRead(”HKLM\SOFTWARE\KHID\Fastball\MIB\IpAddress”)
Script.Trace ”Power cycle the machine to make setting effect!”
MsgBox(sLine)
End If
End If
5. Select RUN and enter 192.168.1.150 as the new PPP IP address.
6. Power cycle the machine, and then both the DRE and MCS will work on the new subnet.
Loading Updated Modality Preferences Database via Kodak REMOTE MANAGEMENT SERVICES
For DRE version 1.0.1.b03, when the MPDB file is downloaded via the Kodak REMOTE MANAGEMENT
SERVICES, the 8150 LASER IMAGER has to be triggered to look for the file. The script TriggerMPDB.vbs
can be executed using the Remote Script function.
For DRE version 1.0.2.b04, this is no longer needed. The MPDB file loaded from REMOTE
MANAGEMENT SERVICES should update properly without the trigger script.
Is REMOTE MANAGEMENT SERVICES Running?
When you press the Start Service button during the setup for REMOTE MANAGEMENT SERVICES, you
did not know if the service had started unless you used pcAnywhere Software to check it. The status of
REMOTE MANAGEMENT SERVICES can now be checked by running the ListRMSServices.vbs script
from the Remote Script function. To view what the script has done, click on the Script RunTime tab.
You Ghosted the 8150 LASER IMAGER and you don’t have Videos on the LOCAL PANEL
Load the Video CD (SP7F6699) into the 8150 LASER IMAGER CD drive and run the CopyLPVideo.vbs
script using the Remote Script function.