Kodak DryView 8150, Service Manual, Page: 403 / 470

Section 8 -- QuickSheets
8-61
2005 July Rev. B 7F3318
RF Tag I/F
Board micro.
RF Tag Subsystem Test-- --
MCS sends an ’execute diagnostics” command to the
micro on the RF Tag Interface Board, which in turn builds
and sends a ”Read Version” command to the RF Reader
Board. The micro checks the response for errors and
reports back to the MCS. (The test does not check the RF
MCS sends
”Execute
Diagnostics”
command.
RF Tag micro
builds and
sends ”Read
Version” com--
mand.
To RF Tag Interface Board
To RF Reader Board (Transceiver)
RF Reader
Board
responds.
RF Tag micro
RF Tag micro
reports to
MCS.
Error
reported?
To RF Tag Interface Board
Yes
No
Antenna or read the RF tag.)
checks for
errors in
response.
25--922
25--922
From Film Feeder
Module Test
To Densitometer
Module Test
Figure 8-2. RF TAG SUBSYSTEM Diagnostics