
Service Manual
4-6
7F3318 2005 July Rev. B
4-2-3.
PROCESSOR ROLLERS and Related Parts
Disassembly
1. Remove power and disconnect the POWER CORD.
!
Warning
When the POWER CORD is plugged in, hazardous voltages are present in some areas of the
IMAGER. These voltages can cause severe injury or death.
2. Open the UPPER HOOD and allow the PROCESSOR to cool before proceeding.
!
Caution
Hot Surface
When the IMAGER is initially powered down, the PROCESSOR DRUM and ROLLERS are hot.
Take care when removing the ROLLERS.
3. Release the 2 CLAMPS and open the PROCESSOR COVER.
4. To remove the ROLLERS, simply lift each ROLLER from the RETAINER CLIPS at each end
(Figure 4-4).
Note
The BEARINGS on the ends of each ROLLER are loose. Take care not to lose the BEARINGS or
the SPRINGS that they mount on in the RETAINER CLIPS.
Reassembly
1. Install a BEARING on each end of the ROLLER, and make sure each RETAINER CLIP includes a
SPRING.
2. Insert the BEARINGS (with ROLLER) into the RETAINER CLIPS as shown in the inset in Figure 4-4.
Check that: (a) each ROLLER rotates freely, (b) each BEARING is free to slide against the SPRING in
the RETAINER, and (c) the SPRINGS are not bent.
Figure 4-4. Removing the PROCESSOR ROLLERS
Summary of Contents for DryView 8150
