Kodak DirectView CR 500 System, User Manual

Page: 187 / 236

Key Operator Functions
August 1, 2003 1F1976 9-79
2.
Enter two characters that do not appear in any of your bar codes.
3.
Select Submit.
4.
Select Program Bar Code Scanner.
5.
Use the bar code scanner and scan each bar code in numerical order
and then select
Next.
IMPORTANT:
If you have trouble scanning the bar codes from the
monitor, use the bar codes that are available later in this
section of the manual. However, make sure the bar code
names match the names on the monitor.
6.
Scan the bar code.
NOTE: Do not scan the test bar code more than once. If you scan it twice, it
will fail.
Set Country Codes
Set Country Codes