Kodak DirectView CR 500 System, User Manual

Page: 125 / 236

Key Operator Functions
August 1, 2003 1F1976 9-17
Body Part
Configuration
The procedures for changing the names, colors, and button positions are
consistent for all the configuration setups. You may want to change the
locations or colors of buttons so they are grouped more logically for your
hospital.
From the Key Operator Functions menu, select System Configuration
and then Workflow Optimization . Select Body Part Configuration .
Changing Button Names
1.
Select the button you want to change.
2.
Select Change Name.
3.
Enter a new name using the keyboard, select Apply Name , and select
Save Changes.
Changing Button Colors
1.
Select the button you want to change.
2.
Select Change Color.
3.
Select one of the eight Change Color buttons, and select Save
Changes. If you want to create a custom color for one of the eight color
choice buttons, see page 9-69 .
NOTE: If there is a button that you do not want to appear on the screen, clear
the Visible check box.