Kodak DirectView CR 500 System, User Manual

Page: 12 / 236

1-2 1F1976 August 1, 2003
Safety and Related Information
CAUTION
:
This product contains lead and mercury. Disposal of
components containing these materials may be regulated due
to environmental considerations. For disposal or recycling
information, please contact your local authorities or visit the
Electronics Industry Alliance Web site at http:\\www.eiae.org.
LASER WARNING
:
This equipment uses a visible red laser. Laser radiation is
present when the machine is opened and the inner light lock
cover is removed. Avoid direct exposure to the laser beam.
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to
Laser Notice 50, dated July 26, 2001.
Compliance Statement
This is a Class I Laser product in conformance with DHHS regulations.
This is a Class 1 Laser product in conformance with IEC 60825-1.
AUTHORIZED REPRESENTATIVE:
Manager, Product Safety, Kodak GmbH; Hedelfingerstr. 54-56, 70327
Stuttgart, GERMANY.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
WARNING
:
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
This is a Class A product based on the standard of the Voluntary Control
Council for Interference from Information Technology Equipment (VCCI). If
this is used near a radio or television receiver in a domestic environment, it
may cause radio interference. Install and use the equipment according to the
instruction manual.