Kodak DirectView CR 500 System, User Manual

Page: 122 / 236

9-14 1F1976 August 1, 2003
Key Operator Functions
Saving System
Configurations
1.
Insert a floppy disk into the CR System and select OK . If you do not insert
a floppy disk, the CR System prompts you to do so.
2.
At the Key Operator Functions menu, select System Configuration ,
then select the Save all Configs button at the bottom of the screen.
Restoring
Configurations
You can save configurations to a floppy disk for backup purposes, then load
(restore) them. Using this technique you can copy settings from one
CR System and transfer them to other systems, reducing the time it takes to
change the configuration of multiple machines.
To restore system configuration information:
1.
At the
Key Operator Functions
menu, select
System Configuration
,
then select
Restore Configuration.
Restore Configuration
2.
Insert the floppy disk that contains the configuration information into the
CR System.
3.
Select each check box to select the options you want to load, or select
Select All .
NOTE: Do not select items below the line unless you are restoring settings to
the same machine.
4.
Select Load Config.
5.
Select Select All to load all settings.