Kobold SPB100, User Manual

Page: 66 / 212

66
Fault Possible cause and solutions
– Check whether the cleaning cloth is straight and firmly
fixed on the cloth holder frame.
– Check whether the green nose of the cleaning cloth has
been correctly and fully pushed in.
The cloth holder frame is not inserted correctly.
– Check whether the cloth holder frame has attached itself
correctly to the DuoClean.
– It is possible that original Kobold cleaning cloths were not
used.
– Only use original Kobold cleaning cloths.
– Use the Kobold MF600/601 Universal cleaning cloth on
rough surfaces.
The DuoClean causes
streaks/marks on the floor. It is possible that the sealing lip frames are dirty and jammed.
– Remove the front sealing lip frame, see Checking and
cleaning the sealing lip frames [ } 63] .
It is possible that the cleaning cloth is soiled excessively.
– Change the cleaning cloth, see Replacing the cleaning
cloth [ } 61] .
The DuoClean is not
vacuuming effectively.
3
It is possible that the sealing lip frames are dirty and jammed.
– Remove and clean the sealing lip frames, see Checking
and cleaning the sealing lip frames [ } 63] .
– Also check whether the suction openings between the
sealing lips are clear from underneath. If necessary, shake
out any objects inside.
– Check whether the sealing lip frames are able to move.
The cleaning cloth may be attached to the cloth holder frame
at an angle and be obstructing the sealing lip frames.
– Check whether the cleaning cloth is evenly fixed on the
cloth holder frame.
It is possible that the suction channel is blocked.
– Open the inspection flap on the left hand side of the
DuoClean to clear any blockages. This can be done by
inserting a coin into the groove (1).
The magnetic latch on the inspection flap comes open (2).
You can now clearly see inside the suction channel.
– Remove any objects that are blocking the suction channel
(3). To do this, use an appropriate blunt object (e.g.
screwdriver, crochet hook).