Kobold SPB100, User Manual

Page: 55 / 212

55
6.3.3 Attaching the cloth holder
1. Place the cloth holder onto the floor with the cloth correctly
attached.
2. Tilt the cordless vacuum cleaner backwards in the standby
position (1).
ð
The DuoClean is now positioned on its rollers.
3. Roll the cordless vacuum cleaner directly onto the cloth
holder.
4. Tip the cordless vacuum cleaner onto the cloth holder (2).
ð
The cloth holder will click as it engages with the DuoClean (3).
The device is now ready for use.
The cloth holder is symmetrical. You simply need to approach
the cloth holder square on and not at an angle to ensure that the
DuoClean correctly engages with the cloth holder.
6.3.4 Removing, filling and inserting the tank
1
2
3
5
6
7
4
For wet cleaning, moisture is automatically applied to the cloth
from the tank in the DuoClean.
1. Remove the tank from the DuoClean. To do this, gently pull
up the green tank release mechanism at the back of the
DuoClean (1) and pull the tank backwards to lift it out.
2. Unscrew the tank cap (2).
3. Fill the tank cap (3) with Koboclean as far as the line (3 ml).
4. Pour this quantity into the tank (4).
5. Fill the tank with fresh tap water to the maximum mark (5).
6. Put the cap back onto the tank and do it up.
7. Insert the tank into the DuoClean. This is done by first
pushing the front of the tank into the DuoClean (6) and then
pressing the back of the tank into its holder (7).
ð
You will hear the tank snap into place.