Knick Stratos Pro A2 COND Series User Manual Download Page 99

Page: 99 / 144

Diagnostics

Display

Menu item

Displaying the logbook entries

Select LOGBOOK using



, press enter to confirm.

Using the



keys, you can scroll backwards and

forwards through the logbook (entries -00-...-99-),

-00- being the last entry.

If the display is set to date/time, you can search for a

particular date using the



keys.

Press



to view the corresponding message text.

If the display is set to the message text, you can

search for a particular message using the



keys.

Press



to display the date and time.

Press meas to return to measurement.

Extended logbook / Audit Trail (via TAN)

Using the



keys, you can scroll backwards and

forwards through the extended logbook (entries

-000-...-199-), -000- being the last entry.

Display: CFR

Audit Trail also records function activations

(CAL CONFIG SERVICE), some Sensoface messages

(cal timer, wear) and opening of the enclosure.

Summary of Contents for Stratos Pro A2 COND Series

















































































































































Search results

Summary of Contents for Stratos Pro A2 COND Series

Reviews:

Brands by name

Popular brands

Knick Stratos Pro A2 COND Series, User Manual

Search results

Summary of Contents for Stratos Pro A2 COND Series

Reviews:

Brands by name

Popular brands