manualshive.com logo in svg

Knick Stratos Pro A2 COND Series, User Manual

Share
Download
Knick Stratos Pro A2 COND Series User Manual Download Page 79

79

Step

Action/Display 

Remark

Select HOLD 

mode

Press menu key to call 

the selection menu,  

select HOLD using the 



keys, press enter 

to confirm.

Now the device is in HOLD 

mode. The HOLD mode can also 

be activated externally via the 

HOLD input. During HOLD the 

output current is frozen at its last 

value or set to a fixed value.

Disconnect old 

sensor,

connect new 

sensor.

Temporary messages are dis-

played during the replacement 

but neither output to the alarm 

contact nor entered in the log-

book.

Wait until the 

sensor data are 

displayed.

MEMO SENS

Check sensor 

data

MEMO SENS

View sensor informa-

tion using 



 keys,  

press enter to confirm.

You can view the sensor manu-

facturer and type, serial number, 

and last calibration date.

Check 

 measured 

values, 

then  

exit HOLD.

Hit meas key:  

Return to the selec-

tion menu. Hold meas 

key depressed: Device 

switches to measuring 

mode.

The sensor replacement is 

entered in the extended 

 logbook.

Digital Sensors

Summary of Contents for Stratos Pro A2 COND Series

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands