Knick Stratos Pro A2 COND Series User Manual Download Page 7

Page: 7 / 144

Introduction

Intended Use

Stratos Pro A2... MSPH is used for pH/mV, ORP and temperature

measurement using Memosens sensors in industry, environment,

food processing and sewage treatment.

Enclosure and mounting possibilities

• The sturdy molded enclosure is rated IP 67/NEMA 4X for outdoor

use. It is made of glass-reinforced PBT / PC and measures

148 mm x 148 mm x 117 mm (H x W x D).

It is provided with knockouts to allow:

• wall mounting (with sealing plugs to seal the enclosure),

see page 13

• post/pipe mounting (Ø 40 … 60 mm, 30 … 45 mm)

see page 14

• panel mounting (138 mm x 138 mm cutout to DIN 43700),

see page 15

Weather protector (accessory)

The weather protector, which is available as accessory, provides

additional protection against direct weather exposure and

mechanical damage, see page 14.

Connection of sensors, cable glands

For connecting the cables, the enclosure provides

• 3 knockouts for cable glands M20x1.5

• 2 knockouts for NPT 1/2” or rigid metallic conduit

For quasi-stationary installations with Memosens sensors, we

recommend using the M12 device socket (accessory ZU 0822) instead

of a cable gland – it allows simple replacement of the sensor cable

without opening the device.

Sensors

The device has been designed for application with Memosens

sensors.

Summary of Contents for Stratos Pro A2 COND Series

















































































































































Search results

Summary of Contents for Stratos Pro A2 COND Series

Reviews:

Brands by name

Popular brands

Knick Stratos Pro A2 COND Series, User Manual

Search results

Summary of Contents for Stratos Pro A2 COND Series

Reviews:

Brands by name

Popular brands