SIMDOS diaphragm metering pump
Operation
KNF Flodos BA_SIMDOS_EN_02_160044.docx
Translation of original operating manual
29
7.19. Contrast
This refers to the contrast setting for the display. Adjust the
contrast if the display is poorly legible.
7.20. Reset
The “Reset” function is used to reset the pump to its factory
settings.
Input
Meaning
No
No reset
Yes
Pump is reset to its factory settings
Code
No function
Tab. 16: Reset
The reset function will restore the following settings:
Value
Setting = factory setting
Flow rate [ml/min]
10.0
Unit
ml/min
Time counter
Off --min -- sec
Fluid type
Standard
Calibration
100%
Language
English
Analogue input
Off
Digital input 1
Off
Digital input 2
Off
Digital output
Alarm
Autostart
Off
Contrast
40
Tab. 17: Reset factory settings
System
Fig. 43: Contrast
System
Fig. 44: Reset
