24
Operation
KNAUER
10D User Manual V7670, Version 2.3
Operation
The detector can be operated in two ways:
Control via the buttons on the front panel
Control with chromatography software
Basic Operation of the Device
Display
The status display shows the values for absorption and wave-
length.
Note
When the deuterium lamp has been turned off or is heating, the
absorption values are substituted by OFF or HEAT, respectively.
Buttons
There are 3 buttons on the detector that can be used for basic
operation. Using the buttons, you can monitor the device and
change the settings.
Note
To avoid falsifying measuring values, KNAUER recommends to
press the Autozero button before every measurement and after
exchanging eluents.
Control of the Device
You can control the device using the buttons on the front panel.
Handle the buttons in the following manner:
Handling
1. Hold down left arrow key. Scroll through the menu using the
right arrow key.
2. Let go of left arrow key and, using both arrow keys, set the
values.
Legend
1
Absorption
2
Wavelength
Fig. 10
Status display
+0.24626
243
1
2
Figure
Function
Fig. 11
Arrow keys
Hold down left arrow key. Scroll
using the right arrow key.
Press any of the arrow keys to set
values and to change settings.
Fig. 12
Autozero
Initiating an autozero: Absorption is
set to 0.000.
