16
Unpacking and Setup
KNAUER
10D User Manual V7670, Version 2.3
Connectors on the Rear Side
All connectors are located on the rear side of the detector
.
External devices like computers, fraction collectors, etc. can be
connected in 3 different ways to the detector:
Connected via the spring strip (remote connector)
Connected via LAN within a network
Connected via RS-232
Spring Strip for Remote Control
CAUTION!
Zerstörung der Elektronik durch elektrostatische
Entladung!
Geerdetes Armband tragen.
The spring strip is used for remote control. The single ports
transport start, control and error signals.
Plug Connector Assignments
Legend
1
RS-232 port
2
LAN port
3
Spring strip
4
Analog port
5
Power connection
6
Ground
7
Fan
Fig. 3
Detector Rear view
1
2
3
4
5
6
7
Connector
Function
GROUND
Reference point of the voltage at the
signal inputs.
AUTOZERO
A signal (short-circuit to GROUND)
sets the measuring signal to zero.
