
4
97-1129-01 Rev. D
www.kistlermorse.com
TechnIcal SpecIFIcaTIonS
FuncTIonal
Voltage - Operating Range
AC Power: 115 vAC ± 10%, 50/60 Hz; 230 vAC ± 10%, 50/60 Hz 30 vA
Operating Temperature
-4º to 122º F (-20º to 50º C)
perForMance
Transducer/Sensor Input All Kistler-Morse half-bridge sensors, full-bridge foil gage
Excitation
Programmable between 5 and 13 volts @ 400 mA
Resolution
Selectable 16 bits (1 part in 65,536) to 21 bits (1 part in 2,097,152) in 1 bit increments
Conversion Speed
16 bits = 17 ms, 17 bits = 20 ms, 18 bits = 25 ms, 19 bits = 34 ms,
20 bits = 50 ms, 21 bits = 100 ms
Span
Programmable between ± 3.0 v @ 12 v excitation, gain = 1 ± 19.5 mv @ 10 v
excitation, Gain = 128
Temperature Stability
Zero 1 ppm/º C; Span 5 ppm/º C
Common Mode
Rejection
92 db min @ DC; 150 db min @ 60 Hz
normal Mode Rejection
100 db min @ 60 Hz
Multi-Vessel Remote Tare
Relay Output
2 relay outputs; Form "C" SPDT, programmable, 10 A 110 vAC, 8 A 230 vAC non-inductive;
for motors and other large inductive loads, contractors rated for the load are required.
phySIcal
Display
Back lit alphanumeric liquid crystal, one line of 16 characters, selectable bar graph
or engineering units format
Programming/Parameter
Entry
Integral 19-key sealed membrane tactile keypad
Setup
Menu-driven prompts
Memory
non-volatile RAM
Enclosure
Designed to meet nemA 4X ABS or nemA 4X 304L SS
Humidity
1% to 95% (non-condensing)
Storage
-4º to 140º F (-20º to 60º C)
Dimensions
ABS version: 6.375" x 11" x 5.68" (161.91 mm x 279.4 mm x 144.27 mm)
SS version: 7.87” x 9.84” x 5.91” (199.9 mm x 249.94 mm x 150.11 mm)
Mounting Hole Pattern
ABS version: 2.5" x 10.4" (63.5 mm x 264.16 mm).
SS version: 5.31” x 9.13” (134.87 mm x 231.90 mm)
Shipping Weight
ABS version: 6 lbs (2.6 kg). SS version: 11.3 lbs (5.1 kg)
opTIonS
PCBs
rS-422, rS-485: (optical isolation standard), baud rate 1200, 2400, 4800, 9600 or 19.2k.
PLC interfaces: Devicenet (polled slave), Profibus DP, ethernet I/P.
Analog Output: 0-20 or 4-20 mA, 14 bit resolution, 500 vAC isolation, maximum
load 600 ohms with internal loop supply
approvalS
Ce, uL (uS and Canada): general Purpose
Summary of Contents for SVS2000
