KM SVS2000, Installation & Operation Manual, Page: 30 / 89

26
97-1129-01 Rev. D
www.kistlermorse.com
Following are two examples illustrating how to navigate to the relay1 Deadband menu:
example 1. go directly to nearest numbered menu —
1. In run mode, press the ‘3’ key and ‘1’ key. The display shows:
FunCTIOn: 31
Press the enter key. The display shows:
31 SLCT reLAy #1
2. Press the enter key to select this menu. The display shows:
reLAy1 vALue
3. Press the up Arrow key to go to the next menu at this level. The display shows:
reLAy1 DeADBAnD
4. Press the Enter Key to select this menu.
example 2. navigate through menus —
1. In run mode, press the Func key. The display shows:
10 DISPLAy menu
2. Press the up Arrow key to go to the next menu at this level. The display shows:
20 CAL menu
3. Press the up Arrow key to go to the next menu at this level. The display shows:
30 SETPOInT MEnU
4. Press the enter key to select this menu. The display shows:
31 SLCT reLAy #1
5. Press the enter key to select this menu. The display shows:
reLAy1 vALue
6. Press the up Arrow key to go to the next menu at this level. The display shows:
reLAy1 DeADBAnD
7. Press the Enter Key to select this menu.