Operating manual 17.410+411
Pos.: 20
Dateiname
Firma
Datum
Rev
BK-DH 700 x 1000 eng.doc
BRUKS-KLÖCKNER
27.02.09
00
Seite 59 von
61
11 KEEPING OF SPARE PARTS
Stock keeping of the most important spare- and wear parts on site is an important
precondition for the permanent functioning and readiness for operation of the
BRUKS-KLÖCKNER - drum chipper.
We only accept responsibilities for original spare parts delivered by us.
We draw your attention to the fact that we have tested and released original spare
parts and accessories which were not delivered by us. The fitting and/or use of such
products can under certain circumstances have negative effects to the prescribed
properties of the belt conveyor and for that reason impair actively and/or passively
the safety. For damages resulting from the use of non-original spare parts and ac-
cessories we exclude any responsibility and guarantee on the part of
BRUKS-
KLÖCKNER GmbH.
A list of recommended spare parts to be kept in stock can be obtained from us or
from one of our agents.
To order spare parts please use the spare part drawings and piece lists in the follow-
ing chapter.
For spare part orders please specify as follows:
Machine-No.:
Type:
Module/Group No.:
Part No.:
Required quantity:
