GB
36
Wall Installation, Single Oven
Secure oven to cabinet using the screws provided.
Screws should be inserted through the mounting holes
in the positions indicated in the frame (open door to see
frame and mounting holes). Do not over tighten screws.
Figure 11
Note:
1. Do not slide oven across floor. Damage to floor covering or floor could result.
2. The oven support surface must be a minimum 19 mm thick plywood platform, solid, level
and flush with the bottom of the cabinet cut-out.
3. Use extreme caution when moving or installing the oven. It is very heavy.
4. Be very careful when moving or installing the oven to avoid damage to the oven frame or
damage to the cabinets.
5. Be sure to level oven. An oven that is not level may provide poor or inconsistent baking
results.
6. Be careful when placing oven. DO NOT pinch the wiring between the oven back or wall and
the inner cabinet wall or floor.
WARNING
Securety fasten oven to cabinet using the
screws provided. Failure to do so could
result in oven moving or tipping during use
and causing damage to the oven or cabinets
or personal injury.
See Figure 10
Ltr.
DESCRIPTION
DIMENSION (mm)
A
Cut-out Width
722
B
Cut-out Depth
590
C
Cut-out Height
692
D
Floor Bottom of Cut-out
865
E
Minimum Spacing
13
